× Welcome to the CMASS forum!

A place to discuss anything related to CMASS (and other) launches.

L2 Cert Flight on the 22nd & I need a 15/15 rail

More
11 years 7 months ago #6213 by alan
Reminder - Someone needs to tether the hex key to the 15x15 rail, we can never seem to find the wrench when assembling/deassembling the rail. -Alan

Please Log in or Create an account to join the conversation.

More
11 years 7 months ago #6215 by mainer
Scott @ MMMSclub has one, we used it this past weekend

Please Log in or Create an account to join the conversation.

More
11 years 7 months ago #6218 by Boris Katan
I also have a project I would like to launch on a 15/15 rail in Berwick on 9/29.

The Midnight Express flown at LDRS. Pictured in the gallery.

Sending it up on a K740 CStar - Space Shuttle propellant.

Please Log in or Create an account to join the conversation.

More
11 years 7 months ago #6219 by billspad
You can try out the new heavy high power pad. It can take 1010 and 1515 rails. If it works the way I want it to, this one is going to stay with Scott in Maine and I'm going to modify one of ours to work the same way.

Please Log in or Create an account to join the conversation.

More
11 years 7 months ago #6220 by mainer
Heavy pad with chicken legs! Where's the heavy legs?

Please Log in or Create an account to join the conversation.

More
11 years 7 months ago #6221 by guyw

Heavy pad with chicken legs! Where's the heavy legs?


If it is like our current pads, it has a central rod that is pushed into the ground which would hopefully make heavy legs unecessary. As it is, the pad is all metal (pipe) and fairly heavy to carry on the walk from the car/trailer to set up point. (I know, use the cart, but we don't have a nice fold up cart like CMASS has in Maine that I know of).

Please Log in or Create an account to join the conversation.