Hi, I'm looking for tooling (or suggestions) for the following to borrow:
1) Cut a large fiberglass tube. I normally order the cuts when I order the tube (from Madcow, etc), but I missed one. Is there a job shop around that can do this that someone would recommend? I really don't want to spin up on jigs and dust control, masks, etc.
2) A vaccum pump to carbon fiber/fiberglass layer some fins.
3) A jig to cut slots in tubes. Such as this
www.apogeerockets.com/Building_Supplies/...ne_Tube_Slotting_Jig Although, yes, there will be some masks and duct control, but the slots are small, so it should be much.