Packing The High Power Pads - 17-Apr-2017 by Alan S
Each of the CMASS High Power launch pads comes in its own storage tray. When setting up the range, place the entire tray in the cart to take it out to the pad site. Remember to bring a battery with you.
At the end of the launch, the pad parts are packed back in the tray. The following pictures show how to pack up the pad. Due to space and geometry contraints, there is really only one way to make everything fit so the trays can be stacked in the trailer.
Hint: Each tray is lettered "A", "B", "C", "D". The path to success is to keep the pad parts matched to its tray. The Sign and some parts don't fit in other trays. For example, the "B" sign and pad goes in the "B" tray.
The pictures below show the hints to make it all work. Special areas of note are encircled in RED.
When you are ready to load the trailer, pad "D" tray goes in the trailer first (directly on the floor). Then stack pad "C", then "B", then "A". There is a cover that goes on top of tray "A". Thanks !