If I want to make a standoff for a 1010 rail by sliding a pan head screw into the slot and tightening it with a washer and a wing nut, what size screw should I use?
I found this old image on TRF, but the size for 1010 isn't shown.
https://cdn.imagearchive.com/rocketryforum/internal_data/attachments/183/183567-3a311676e57762392d6a3d08495f71f3.data?response-expires=Fri%2C%2007%20Feb%202025%2019%3A30%3A43%20GMT&response-content-type=image%2Fjpeg&X-Amz-Content-Sha256=UNSIGNED-PAYLOAD&X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=I3UPHPWOPY63ZMOGLZFM%2F20250131%2Fnyc3%2Fs3%2Faws4_request&X-Amz-Date=20250131T193043Z&X-Amz-SignedHeaders=host&X-Amz-Expires=604800&X-Amz-Signature=ba8403ee2fd69b3f2101e86d9f6f3982d7ff16998c1d1abbf7c36464d6243f72