Actually, For Purchase for MIT Team

  • KennB
  • KennB's Avatar Topic Author
  • Offline
  • Administrator
  • Administrator
More
8 years 11 months ago #7974 by KennB
After an unfortunate recovery event on their previous launch, the MIT Rocket Team is in need of a CTI ProX 75 mm, 4 grain hardware set, P75-4G-HS. They've contacted Robert and Gloria but they don't have one in stock and can't get it in time for the Team's needs.

If you have one the Team can use they will replace it with a new one on order from AMW/ProX.

Please reply to this thread or private message me if you can help.

Thanks.
Kenn

P.S. This is a different group than the ones we coined the expression "The MIT Wiggle" for.

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago #7975 by Parrythewind
Replied by Parrythewind on topic Re: Actually, For Purchase for MIT Team
Hi Kenn, I have only the case available at the moment. My closure set is being anodized and should arrive this week or next. What is the time frame here? Let me know if this helps. Dominic.

Please Log in or Create an account to join the conversation.

  • KennB
  • KennB's Avatar Topic Author
  • Offline
  • Administrator
  • Administrator
More
8 years 11 months ago #7976 by KennB
Replied by KennB on topic Re: Actually, For Purchase for MIT Team
The target launch date is 09 May in Berwick.

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago #7977 by Boris Katan
Replied by Boris Katan on topic Re: Actually, For Purchase for MIT Team
I have a CTI 75mm 4grain complete motor - case and closures.
Used it for my L3.

I would be OK with loaning it out.
Only challenge is that I live in Fairhaven MA, 100mi from Amesbury.

If we can work out transportation, they can use it.

Please Log in or Create an account to join the conversation.

  • KennB
  • KennB's Avatar Topic Author
  • Offline
  • Administrator
  • Administrator
More
8 years 11 months ago #7978 by KennB
Replied by KennB on topic Re: Actually, For Purchase for MIT Team
Dominic, I'm having Julia check with Robert and Gloria to see if they have the hardware from another grain count set up that would work with your 4G case. It wouldn't be too difficult to get yours to the team.

Boris, your set up would only have to go to Cambridge. There's enough time to send it via UPS or USPS.

When Julie figures out which way to go, I'll forward the information to one or the other of you.

Thanks for stepping up, guys.

Please Log in or Create an account to join the conversation.

  • KennB
  • KennB's Avatar Topic Author
  • Offline
  • Administrator
  • Administrator
More
8 years 11 months ago #7980 by KennB
Replied by KennB on topic Re: Actually, For Purchase for MIT Team
Robert and Gloria came up with an Aerotech RMS casing that will do the job. The reloads are cross-certified in the case so everything will okay using it.

Thanks again, Dominic and Boris for your offers to use your equipment.

Please Log in or Create an account to join the conversation.