Eggtimer altimeter assembly jam

I've had excellent luck assembling Eggtimer altimeters. I will plan to bring my soldering equipment (I use a pressure solder paste dispense and a toaster oven as a reflow oven) to the Dec 17th meeting and offer an assembly jam for anyone wanting to assemble/fix their Eggtimer..

- If you have an unassembled Eggtimer, bring it, and we will put it together.

- If you have a botched assembly, we can try to repair it.

- Also, Cris Irving of Eggtimer has great black Friday prices. See this TRF thread www.rocketryforum.com/threads/the-famous...155866/#post-1936029. Sale ends Dec 2nd. so don't delay

The Eggtimer proton is a great deal. Six programmable channels for $50.

---

It's that time of the year again, when Eggtimer fans of the past, present, and future take advantage of the joy of the holidays and save big bucks (which can be used to buy motors or "that" kit that you've been pining for). Since we don't like being haunted by spirits at 4:00 am in order to get some sweet rocketry deal, our sale is going to run from Saturday Nov. 16th through Monday Dec. 2nd.

Altimeter/Av Bay Stuff
o Eggtimer Proton Flight Computer (6 outputs, 120G accelerometer, WiFi) Reg. $70, sale price $50 (Lowest price ever!)
o Eggtimer Quantum WiFi-Enabled Flight Computer, Reg. $40, sale price $30
o Eggtimer Classic Flight Computer, Reg. $35, sale price $25
o Eggtimer Quark 2-Output Deployment Controller, Reg. $20, sale price $15
o Eggtimer WiFi Switch, Reg. $20, sale price $15

Eggfinder GPS Trackers
o Eggfinder LCD Starter Set (Eggfinder TX transmitter & LCD receiver) Reg. $120, sale price $100
o Eggfinder Mini/LCD Starter Set (Eggfinder Mini transmitter & LCD receiver) Reg. $125, sale price $100 (Lowest price ever!)
o Eggtimer TRS Starter Set (Eggtimer TRS transmitter & LCD receiver) Reg. $140, sale price $120
o Eggtimer TRS Starter Set, 70cm Ham version (twice the range of the 900 MHz unit! Includes external antennas) Reg. $160, sale price $130
o Eggfinder Starter Set (Eggfinder TX transmitter & RX "dongle" Receiver) Reg. $90, sale price $70
(specify USB cable or Bluetooth version)
o Eggfinder Mini Starter Set (Eggfinder Mini transmitter & RX "dongle Receiver) Reg. $95, sale price $75
(specify USB cable or Bluetooth version)
o Eggfinder TX GPS transmitter, Reg. $70, sale price $50 (Yup, $50 for a GPS transmitter...)
o Eggfinder Mini GPS transmitter, Reg. $75, sale price $50 (Lowest price ever!)
o Eggtimer TRS GPS/Flight Computer, Reg. $90, sale price $70
o Eggtimer TRS, 70cm Ham Version, Reg. $100, sale price $75
o Eggfinder LCD receiver only, Reg. $55, sale price $50
o Eggfinder LCD-GPS Module for LCD receiver, Reg. $40, sale price $30
o Eggfinder RX receiver only, Reg. $25, sale price $20
(specify frequency and USB cable or Bluetooth)

We have inventory on almost everything, but due to the nature and the volume involved in this sale it is highly possible (if not likely...) that we might run out of something. If we do, we'll let you know, and get busy making more of them. Nobody's going away empty-handed... you just might have to wait a week or so if we run out. If you're giving something as a gift, be sure to let us know, and order early... our email is This email address is being protected from spambots. You need JavaScript enabled to view it.

If you need details on any of our stuff, check out our web site... EggtimerRocketry.com

And as always, thanks for your continued support!

Cris Erving
Eggtimer Rocketry

I own two Eggtimer Quantums, one Proton, and I just ordered three more Quantums (Quanta?). My soldering set up is pretty simple, just a 15W soldering iron with a fine tip. I'll see if I can find some time on 12/17 to join the party.

I can actually make the meeting tomorrow 11/19, so bring your stuff.

The Hatch center has a good soldering station.

Bring SMD tweezers (or ones with really knife tips), if you have them.

Here is a tutorial:

I have the paste depsenser, compressor, reflow toaster oven with controller.

We can do a dry run tomorrow, but will probably need to order some more solder paste


www.instructables.com/id/How-to-set-up-r...-use-a-solder-paste/