× Welcome to the CMASS forum!

A place to discuss anything related to CMASS (and other) launches.

Jr Level 1 Project

  • Frank DeAngelo
  • Frank DeAngelo's Avatar Topic Author
  • Offline
  • Gold Boarder
  • Gold Boarder
11 months 3 weeks ago #8670 by Frank DeAngelo
At Monday's CMASS meeting one of the attendees brought his son's Jr Level 1 project. Other than engine retention it looks real good. The problem is that only a little bit of the engine tube sticks out so you cannot attache an engine retention system. The engine tube is 38 mm and the airframe is ~ 2 inch tube. That does not leave much room. The rocket will be at the Acton launch on July 22, 2017. I will bring some 6-32 and 8-32 inserts along with some spacers and 6-32 screws. I sure all suggestions will be welcome.

Please Log in to join the conversation.

Upcoming Events



Weather forecast by: