× Welcome to the CMASS forum!

A place to discuss anything related to CMASS (and other) launches.

Rotating Cutters

  • evvo
  • evvo's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
7 years 3 months ago #8499 by evvo
Rotating Cutters was created by evvo
In my continuing attempt to find a better way to cut tubes, I came across the 'ZipCutter' tools with rotating blades. I keep thinking about that jig that Bill had with the powered blade on the end of a guillotine arm.

Has anyone played with one of these? Can the lower arm of the blade guard be removed?

www.amazon.com/WORX-WX081L-ZipSnip-Cutting-Tool/dp/B019CSHSW8

Please Log in or Create an account to join the conversation.

More
7 years 3 months ago #8500 by guyw
Replied by guyw on topic Rotating Cutters
I found a review that might help:



;-)

Please Log in or Create an account to join the conversation.

More
7 years 3 months ago #8503 by guyw
Replied by guyw on topic Rotating Cutters
I hope my lame attempt at humor didn't keep others from posting. If anyone has used the ZipCutter tools, I would also be interested in hearing about your experiences!

Please Log in or Create an account to join the conversation.

  • evvo
  • evvo's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
7 years 3 months ago #8504 by evvo
Replied by evvo on topic Rotating Cutters
I'll probably pick one up at home depot this weekend, they're only about $30. worst comes to worst I'll grab a hacksaw and remove the lower guard/anvil by force!

Please Log in or Create an account to join the conversation.